SINOTRUK 8×4 Concrete Mixer Truck – ZZ5317GJBV3867W

Product Overview

The SINOTRUK 8×4 Concrete Mixer Truck ZZ5317GJBV3867W is designed for construction-related transportation and concrete delivery applications. Featuring an 8×4 drive configuration, a SINOTRUK WD615.47 engine, and an HW19712CL transmission, this vehicle provides a heavy-duty commercial truck platform for construction projects.

The truck is specified with a 16T AC16 double-reduction driving axle, a SINOTRUK HF9 front axle, and front and rear multi-leaf spring suspension. Its 300L aluminum alloy fuel tank and dual-circuit compressed air braking system are designed to support daily commercial vehicle operation.

With left-hand drive and a listed maximum speed of 90 km/h, the SINOTRUK ZZ5317GJBV3867W can be considered by buyers looking for an 8×4 truck for construction and concrete-related transport requirements. The mixer drum capacity, payload, and other application-specific specifications should be confirmed according to the final vehicle configuration.

Key Features

1. SINOTRUK WD615.47 Engine

The truck is specified with a SINOTRUK WD615.47 engine. The supplied rated output is 371 HP, while the stated displacement is 6.87 L. These engine figures should be verified against the official vehicle documentation before publication or purchase.

2. 8×4 Drive Configuration

The 8×4 configuration provides four driving wheels across a four-axle vehicle setup. It is commonly selected for heavy-duty commercial transportation and construction-related vehicle applications. The truck’s suitability depends on its final configuration and rated axle loads.

3. HW19712CL Transmission

The supplied specification lists a SINOTRUK HW19712CL transmission. This transmission forms part of the truck’s powertrain configuration for commercial vehicle operation.

4. Heavy-Duty Axle Configuration

The truck is specified with a SINOTRUK HF9 front axle and a 16T AC16 double-reduction driving axle. The supplied rear axle ratio is 5.262. These components contribute to the vehicle’s heavy-duty chassis and drivetrain configuration.

5. Multi-Leaf Spring Suspension

The vehicle uses front and rear multi-leaf spring suspension. The supplied frame specification is 270 × 85 × 10 mm. This arrangement is intended for commercial truck applications where chassis support and load-related requirements are important.

6. 300L Aluminum Alloy Fuel Tank

The truck is equipped with a 300L aluminum alloy fuel tank. Actual driving range depends on fuel consumption, vehicle load, road conditions, and operating practices.

7. Braking System

The supplied braking configuration includes a dual-circuit compressed air service brake, a spring-controlled air-release parking brake, and an engine exhaust brake as an auxiliary braking system.

8. Functional Cab Equipment

The cab specification includes a hydraulic main driver’s seat, four-point mechanical cab suspension, temperature-controlled air conditioning, manual window operation, manual cab tilting, and an oil-bath air filter. Additional listed equipment includes a two-stage cab access step, a 165Ah maintenance battery, and SINOTRUK identification.

Technical Specifications

Applications

Subject to the final vehicle type and configuration, this truck may be considered for:

• Construction Projects: Supporting construction-site transportation requirements.
• Concrete-Related Operations: Serving as a truck platform for concrete-related applications if the vehicle is confirmed to be equipped with the appropriate mixer body.
• Infrastructure Development: Supporting transportation needs for road and infrastructure projects.
• Commercial Heavy-Duty Transport: For operators seeking an 8×4 truck configuration for demanding working environments.

The mixer drum capacity, rated payload, gross vehicle weight, and other application-specific details should be confirmed before purchase.

Why Choose Liangshan Wanye International Trade Co., Ltd.?

Founded in 2017 and based in Liangshan County, Shandong Province, China, Liangshan Wanye International Trade Co., Ltd. specializes in international trade involving trucks, truck spare parts, and related commercial vehicles.

Our product range includes dump trucks, tractor trucks, concrete mixer trucks, and trailers. We help international customers coordinate vehicle selection, product configuration, export arrangements, and shipping requirements.

Our business philosophy is Integrity-oriented, Quality First, Win-win Cooperation. We aim to provide practical vehicle sourcing solutions and professional support for customers in international markets.

Frequently Asked Questions

1. What is the model number of this truck?

The supplied model number is ZZ5317GJBV3867W.

2. What engine does it use?

The supplied specification lists a SINOTRUK WD615.47.371 engine. The rated power and displacement should be verified against the official vehicle documentation.

3. What is the drive configuration?

The truck is listed as an 8×4 vehicle.

4. What transmission is installed?

The supplied transmission model is SINOTRUK HW19712CL.

5. What is the emission standard?

The supplied specification lists Euro II. Buyers should confirm the vehicle’s emission documents and destination-market requirements before ordering.

6. What is the mixer drum capacity?

The supplied data does not specify the mixer drum capacity. Please contact us to confirm the available configuration and capacity.

7. Can I request an export quotation?

Yes. Contact Liangshan Wanye International Trade Co., Ltd. with your destination country, intended application, required configuration, quantity, and shipping requirements to discuss availability and export pricing.

Request a Quote

Looking for an 8×4 SINOTRUK truck for your construction or concrete-related business?

Contact Liangshan Wanye International Trade Co., Ltd. to confirm the vehicle configuration, technical specifications, export pricing, and shipping arrangements.

Integrity-oriented, Quality First, Win-win Cooperation.